1

1

SERIE 58 Sin/Cos


 

INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS

  • Resolution up to 2.048 pulses per turn
  • External diameter 58 mm
  • Shaft Ø 6 mm
  • Fixation through synchro flange
  • Protection class IP65 according to DIN EN 60529
  • Connection by cable (other cable lenght available) or industrial connector M12, M23
  • Female connector included

 

 

 

 
MECHANICAL SPECIFICATIONS
Materials Cover. Aluminium
Housing: Aluminium
Shaft: Stainless Steel
Bearings Ballraces
Bearings lifetime 1×1010 rev.
Maximum number of revolutions permitted mechanically 6000 rpm
Protection against dust and splashes according to DIN EN 60529 IP65
Rotor inertia moment 30 gcm2
Starting torque at 20ºC (68ºF) ≤ 0,02 Nm
Maximum load permitted on axial shaft 40 N
Maximum load permitted on radial shaft 60 N
Weight aprox. 0,5 Kg
Operating temperature range -20ºC a +80ºC
Vibration according to DIN EN 60068-2-6 100 m/s2 (10Hz…2000Hz)
Shock 1000 m/s2 (6ms)
Maximum pulses per turn 2048 pulses
Axial or radial connection 2 meters cable or industrial connector M12, M23 (other cable lenghts available on order)
Female connector included

OUTPUT SIGNALS
OUTPUT CIRCUIT Sine-wave
Power supply 5 VDC ±10%
Output voltage 5 VDC
Consumption Tipical: 40 mA
Max: 90 mA
Lenght of cable allowed 50 m
Signal type SIN/COS, 1Vpp
Output signal level 0.6 to 1.2 Vpp
Signal offset 2.5 VDC
Reference 0.2 to 1 VDC
Frequency 200 kHz
Protection polarity inversion Not permanent
Cosine leads (90° electric) Sine, view from the shaft, shaft rotating clockwise